LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> 626 ES, 2.5 D, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - GF4A-El >> Component Tests >> Vehicle Speed Sensor

Vehicle Speed Sensor

NOTE: Vehicle speed sensor signal is input to speedometer sensor in combination meter, then output to PCM.
  1. Disconnect negative battery cable. Disconnect vehicle speed sensor connector. Remove vehicle speed sensor. Measure voltage between sensor terminals while rotating driven gear. See Fig 1.
  2. Voltage reading should fluctuate about 5 volts. If voltmeter needle does not fluctuate as specified, replace sensor. If voltmeter needle fluctuates as specified, sensor is okay.
Fig 1: Testing Vehicle Speed Sensor
G96C19168Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals