LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> 626 ES, 2.5 D, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - GF4A-El >> Component Tests >> Input/Turbine Speed Sensor

Input/Turbine Speed Sensor

Disconnect input/turbine speed sensor connector. Using a DVOM, measure resistance between both input/turbine speed sensor terminals. Resistance should be 253-604 ohms. See Fig 1. If resistance is not within specification, replace sensor. If resistance is within specification, sensor is okay.

Fig 1: Testing Input/Turbine Speed Sensor
G00035664Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals