LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1999 >> Protege DX, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Component Tests >> Solenoid Valves

Solenoid Valves

NOTE: ABS CM and ABS hydraulic unit may be replaced separately.

Turn ignition switch to OFF position. Disconnect hydraulic unit 8-pin connector. Measure resistance between specified terminals of hydraulic unit connector. See Figure . Resistance through each solenoid valve should be 3-5 ohms. If resistance is not as specified, replace hydraulic unit.

scientia non olet · About LEMON Manuals