LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1999 >> Protege DX, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - FN4A-El >> Testing >> Stall Speed Test >> Preparation

Stall Speed Test: Preparation

Check and adjust coolant, engine oil and ATF levels. Warm engine and transaxle to operating temperature. Block front and rear wheels on both sides. Set parking brake. Connect tachometer to engine. Ensure engine idle speed and ignition timing is correct. See appropriate ON-VEHICLE ADJUSTMENTS article in ENGINE PERFORMANCE.

CAUTION: Stall test generates high ATF temperatures. DO NOT hold throttle open at stall speed for more than 5 seconds. Allow engine to idle for at least 2 minutes to cool fluid between each test.
scientia non olet · About LEMON Manuals