Fresh/Recirculated Air Mode Inoperative
WARNING: This page is about a different car, the 1997 Mazda MX-6 and 1997 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
Test fresh/recirculated air actuator. See ACTUATORS . If actuator is okay, disconnect heater control panel connector and fresh/recirculated air actuator connector. Check continuity of wiring harness between control panel connector and fresh/recirculated air actuator connector. See FRESH/RECIRCULATED AIR ACTUATOR WIRING HARNESS TEST table. If continuity is as specified, replace heater control panel. If continuity is not as specified, repair appropriate open wire between connectors.
FRESH/RECIRCULATED AIR ACTUATOR WIRING HARNESS TEST
| Control Panel Terminal Wire Color | Actuator Terminal Wire Color | Continuity | ||||
|---|---|---|---|---|---|---|
| Blue (1) | Blue/Orange | Yes | ||||
| Blue (2) | Blue | Yes | ||||
| Green/Blue | Light Green/Red | Yes | ||||
|
||||||