Accessing Parameter Identification (PID) Information
Turn ignition switch to LOCK position. Connect New Generation Star (NGS) tester to data link connector. Enter vehicle information on NGS tester. After all vehicle options are selected, press SAVE key. Select DIAGNOSTIC DATA LINK TEST, then select RAP - REMOTE ANTI-THEFT PERSONALITY MODULE on NGS tester. Enter appropriate vehicle options on NGS tester. Select PID/DATA MONITOR AND RECORD. Move cursor on NGS tester to desired PID and press TRIGGER key. To retrieve that PID information, press START key on NGS tester.
RAP MODULE SELF-TEST DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Perform Test | ||
|---|---|---|---|---|
| B1309 | Door Lock Circuit Short To Ground | A | ||
| B1341 | Door Unlock Circuit Short To Ground | A | ||
| B1522 | Hood Switch Circuit Short To Ground | (1) | ||
| B1562 | Door Lock Cylinder Circuit Short To Ground | (1) | ||
| B1845 | Anti-Theft Ignition Lock Switch Failure | (1) | ||
| B2425 | Keyless Entry Out Of Synchronization | A | ||
|
||||
SYMPTOM CHART
| Symptom | Perform Test |
|---|---|
| Doors Locks Do Not Operate Using Remote Transmitter | A |
| No Communication With RAP Module | B |