Charge Indicator Does Not Come On With Key On Engine Off
- Check Generator Connector - Disconnect 3-pin harness connector from rear of generator. Check terminals for damage. Repair if necessary. If connector terminals are okay, go to next step.
- Check Ground Connections - Check generator and regulator ground connections. If ground connections are okay, go to next step. Repair ground connections if necessary. Restore electrical connections and check system operation.
- Check Light Green/Red Wire - Restore electrical connections. Turn ignition on. Check for voltage between Light Green/Red wire at generator 3-wire harness connector and ground. If voltage is greater than 1 volt, replace voltage regulator. If voltage is 1 volt or less, check charge indicator bulb and replace if necessary. If bulb is okay, repair open Light Green/Red wire. Restore electrical connections and check system operation.