Cylinder Block
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| Application | In. (mm) | ||
|---|---|---|---|
| Cylinder Bore | |||
| Diameter | |||
| Standard | 3.2677-3.2685 (83.000-83.019) | ||
| .010" (.25 mm) Oversize | 3.2776-3.2783 (83.250-83.269) | ||
| .020" (.50 mm)Oversize | 3.2874-3.2881 (83.500-83.519) | ||
| Maximum Taper | .0007 (.019) | ||
| Maximum Out-Of-Round | .0008 (.020) | ||
| Minimum Deck Height | 10.67 (271.0) | ||
| Maximum Deck Warpage | .002 (.05) | ||