Post-Collision Inspection
WARNING: This page is about a different car, the 1997 Mazda MX-6 and 1997 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
POST-COLLISION AIR BAG SAFETY INSPECTION
| Action | Components |
|---|---|
| Replace After Deployment | Air Bag Module(s), Air Bag Sensor Unit |
| Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) | Clockspring, Impact Sensors & Sensor Mountings, Steering Column, Steering Wheel, Wiring Harness |
| Comments | DO NOT attempt wiring harness repairs. Replace entire harness. Impact sensors must always be installed with arrow on sensor facing front of vehicle. |