LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1998 >> 626 ES, Automatic >> Repair and Diagnosis >> Body & Frame >> Mirrors - Power >> System Tests >> Both Mirrors Do Not Operate >> 626

Both Mirrors Do Not Operate: 626

  1. Inspect 15-amp RADIO fuse located in instrument panel fuse box. If fuse is blown, replace fuse (repair wiring as necessary). If fuse is okay, go to next step.
  2. Remove power mirror switch leaving switch harness connector attached. Turn ignition switch to ACC position. Using a voltmeter, backprobe at terminal "C" (Blue/White wire) at power mirror switch harness connector. See Figure . If battery voltage exists, go to next step. If battery voltage does not exist, repair open in Blue/White wire between instrument panel fuse box and power mirror switch.
  3. Turn ignition switch to LOCK position. Disconnect power mirror switch harness connector. Check continuity between ground and terminal "E" (Black wire) at power mirror switch harness connector. If continuity exists, go to next step. If continuity does not exist, repair open in Black wire between power mirror switch and ground.
  4. Test power mirror switch. See POWER MIRROR SWITCH under COMPONENT TESTS  . If power mirror switch is okay, go to next step. If power mirror switch is defective, replace power mirror switch.
  5. Test both power mirror motors. See POWER MIRROR MOTOR under COMPONENT TESTS  . If both power mirror motors are okay, repair wiring as necessary. See WIRING DIAGRAMS  . If either power mirror motor is defective, replace appropriate power mirror.
scientia non olet · About LEMON Manuals