Seat Control Switch: Millenia
Disconnect power seat control switch, tilt motor and recline motor harness connectors. Check continuity between specified terminals with seat control switch in specified position. See CONTROL SWITCH CONTINUITY TEST (MILLENIA) table. See Fig 1 . If continuity is not as specified, replace power seat control switch.
CONTROL SWITCH CONTINUITY TEST
| Control Switch Position | Continuity Between Terminals | ||
|---|---|---|---|
| Driver's Side | |||
| Front Tilt | |||
| Down | 1A & 1E; 1D, 1H, 1J, 1K & 1M | ||
| Up | 1A & 1D; 1E, 1H, 1J, 1K & 1M | ||
| Off | 1D, 1E, 1H, 1J, 1K & 1M | ||
| Rear Tilt | |||
| Down | 1A & 3A; 1H, 1J, 1K, 1M & 3B | ||
| Up | 1A & 3B; 1H, 1J, 1K, 1M & 3A | ||
| Off | 1H, 1J, 1K, 1M, 3A & 3B | ||
| Slide | |||
| Forward | 1A & 1F; 1C, 1H, 1J, 1K & 1M | ||
| Rearward | 1A & 1C; 1F, 1H, 1J, 1K & 1M | ||
| Off | 1C, 1F, 1H, 1J, 1K & 1M | ||
| Recline | |||
| Forward | 1A & 2B; 1H, 1J, 1K, 1M & 2A | ||
| Rearward | 1A & 2A; 1H, 1J, 1K, 1M & 2B | ||
| Off | 1H, 1J, 1K, 1M, 2A & 2B | ||
| Passenger's Side | |||
| Front Tilt | |||
| Down | 1A & 1D; 1E, 1H, 1J, 1K & 1M | ||
| Up | 1A & 1E; 1D, 1H, 1J, 1K & 1M | ||
| Off | 1D, 1E, 1H, 1J, 1K & 1M | ||
| Rear Tilt | |||
| Down | 1A & 3B; 1H, 1J, 1K, 1M & 3A | ||
| Up | 1A & 3A; 1H, 1J, 1K, 1M & 3B | ||
| Off | 1H, 1J, 1K, 1M, 3A & 3B | ||
| Slide | |||
| Forward | 1A & 1C; 1F, 1H, 1J, 1K & 1M | ||
| Rearward | 1A & 1F; 1C, 1H, 1J, 1K & 1M | ||
| Off | 1C, 1F, 1H, 1J, 1K & 1M | ||
| Recline | |||
| Forward | 1A & 2A; 1H, 1J, 1K, 1M & 2B | ||
| Rearward | 1A & 2B; 1H, 1J, 1K, 1M & 2A | ||
| Off | 1H, 1J, 1K, 1M, 2A & 2B | ||