LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> Protege LX, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Transmission Range Sensor/Switch >> Protege

Transmission Range Sensor/Switch: Protege

  1. Disconnect negative battery cable. Remove battery, air cleaner assembly and battery tray. Disconnect selector cable. Place manual shaft in Neutral. Disconnect transmission range switch connector. Loosen transmission range switch mounting bolts at transmission and hand tighten.
  2. Connect ohmmeter between terminals "A" and "H". See Figure. Adjust switch until continuity exists. Tighten transmission range switch mounting bolts to 71-97 INCH lbs. (8-11 N.m). Verify switch operation.
scientia non olet · About LEMON Manuals