Cylinder Head
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD
| Application | Specification | ||
|---|---|---|---|
| Cylinder Head | |||
| Height | 4.733-4.741" (120.23-120.43 mm) | ||
| Grinding Limit | .008" (.20 mm) | ||
| Maximum Warpage | .006" (.15 mm) | ||
| Valve Seats | |||
| Intake Valve | |||
| Seat Angle | 45° | ||
| Seat Width | .032-.055" (0.80-1.40 mm) | ||
| Exhaust Valve | |||
| Seat Angle | 45° | ||
| Seat Width | .032-.055" (0.80-1.40 mm) | ||
| Valve Guides | |||
| Intake Valve | |||
| Valve Guide I.D. | .2169-.2177" (5.51-5.53 mm) | ||
| Valve Guide Installed Height | .363-.387" (9.22-9.82 mm) | ||
| Valve Stem-To-Guide Oil Clearance | |||
| Standard | .0010-.0023" (.025-.060 mm) | ||
| Maximum | .008" (.020 mm) | ||
| Exhaust Valve | |||
| Valve Guide I.D. | .2173-.2181" (5.52-5.54 mm) | ||
| Valve Guide Installed Height | .363-.387" (9.22-9.82 mm) | ||
| Valve Stem-To-Guide Oil Clearance | |||
| Standard | .0012-.0025" (.030-.065 mm) | ||
| Maximum | .008" (.20 mm) | ||