Cylinder Block
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Cylinder Bore | |||||
| Standard Diameter | 2.9646-2.9653 (75.300-75.319) | ||||
| Oversize | |||||
| .010" (0.25 mm) | 2.9745-2.9751(75.550-75.569) | ||||
| .020" (0.50 mm) | 2.9843-2.9849(75.800-75.819) | ||||
| Maximum Taper & Out-Of-Round | .0007 (.019) | ||||
| Minimum Deck Height (1) | 8.720 (221.5) | ||||
| Maximum Deck Warpage | .006 (.15) | ||||
|
|||||