LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> Protege ES, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.8L >> Fuel System >> Fuel System Pressure Release

Fuel System Pressure Release

  1. Start engine.
  2. Disconnect fuel pump connector near fuel tank (fuel pump connector is accessible from under rear seat cushion).
  3. Allow engine to run until it stalls. Turn ignition off. Reconnect electrical connector.
scientia non olet · About LEMON Manuals