Door Lock Timer Unit
Locate door lock timer unit behind right kick panel. SeeFig 1 . Leave door lock timer unit connector attached. Using DVOM, meas ure voltage at specified terminals of door lock timer unit connector (backprobe connector). SeeFig 2 . See DOOR LOCK TIMER UNIT CONNECTOR PIN VOLTAGES . If voltage measurements are not as specified, replace door lock timer unit.
DOOR LOCK TIMER UNIT CONNECTOR PIN VOLTAGES
| Terminal | Desired Condition | ||||
|---|---|---|---|---|---|
| "A" (30-Amp D/L Fuse) | |||||
| Constant | 12V | ||||
| "B" (Door Lock Actuator - Driver's Side) | |||||
| Door Lock Actuator Unlocked | 0V->8V->0V | ||||
| Other | 0V | ||||
| "C" (Door Lock Actuator) | |||||
| Door Lock Actuator Unlocked | 0V->8V->0V | ||||
| Other | 0V | ||||
| "D" (Door Lock Actuator) | |||||
| Door Lock Actuator Locked | 0V->8V->0V | ||||
| Other | 0V | ||||
| "F" (1) | |||||
| Door Key Cylinder | |||||
| Switch/Door Lock Switch Locked | 12V->8V->12V | ||||
| Door Key Cylinder | |||||
| Switch/Door Lock Switch Unlocked | 12V->0V->12V | ||||
| Other | 12V | ||||
| "H" (Door Key Cylinder Switch - Driver's Side) | |||||
| Door Key Cylinder Switch Locked | 12V->8V->12V | ||||
| Door Key Cylinder Switch Unlocked | 12V->0V->12V | ||||
| Other | 12V | ||||
| "N" (Ground) | |||||
| Constant | Continuity To Ground | ||||
|
|||||