Main Switch

Disconnect main switch connector. Check continuity between specified terminals of main switch with switch in specified position. See MAIN SWITCH CONTINUITY TEST . SeeFig 1 . If continuity is not as specified, replace main switch.

MAIN SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals

Neutral

⁽¹⁾ D & F; H & K

OFF

⁽¹⁾ D & F

⁽¹⁾ D & F; H, J & K

⁽¹⁾	Apply battery voltage across these terminals to test switch backlighting or indicator light.

Fig 1: Identifying Main Switch Terminals

Courtesy of MAZDA MOTORS CORP.