LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> MX-6 LS, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Component Testing >> Driver's Door Lock Link Switch >> With Keyless Entry

With Keyless Entry

  1. Door lock link switch is located inside power door lock actuator. Remove door trim panel. Disconnect door lock actuator 6-pin connector. With door locked, check continuity between terminals "D" (Green/Black wire) and "E" (Blue/Red wire) of door lock actuator connector. If continuity exists, go to next step. If continuity does not exist, replace door lock actuator.
  2. With door unlocked, check continuity between terminals "D" (Green/Black wire) and "C" (Black wire) of door lock actuator connector. If continuity exists, actuator is good. If continuity does not exist, replace door lock actuator.
scientia non olet · About LEMON Manuals