LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> MX-6 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Fuel System >> Oxygen Sensor >> Installation

Oxygen Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

Apply anti-seize to sensor threads (if reusing old sensor or if new sensor is not coated with anti-seize). Install sensor and tighten to specification. See TORQUE SPECIFICATIONS  . Reconnect sensor electrical connector.

scientia non olet · About LEMON Manuals