LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> MX-6 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Fuel System >> Fuel Pump >> Installation

Fuel Pump: Installation

WARNING: This page is about a different variant/trim than selected.

Clean seal area on tank and assembly flange. Lightly coat NEW "O" ring with molybdenum grease. Install seal in groove. Carefully install assembly into fuel tank, ensuring filter is not damaged and seal remains in groove. Install and turn lock ring clockwise until tight. Install fuel tank.

scientia non olet · About LEMON Manuals