LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> MPV LX, 3.0 2 >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Throttle Position (TP) Sensor >> Throttle Position (TP) Sensor Continuity >> Inspection

Throttle Position (TP) Sensor Continuity: Inspection

  1. Turn ignition off. Ensure throttle valve is in closed position. Disconnect TP sensor connector. Check for continuity between terminals "C" and "D" of TP sensor connector. Continuity should exist. If continuity exists, go to next step. If continuity does not exist, adjust TP sensor.
  2. Insert a feeler gauge of specified thickness between throttle lever and throttle stop screw. See TP SENSOR CONTINUITY table. Connect ohmmeter between terminals "C" and "D" of TP sensor connector. If continuity is not as specified, adjust TP sensor.
scientia non olet · About LEMON Manuals