LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> B4000 Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power Recirculating Ball >> Overhaul >> Control Valve Housing >> Disassembly

Control Valve Housing: Disassembly

  1. Using Puller Attachment (T58L-101-B) and Slide Hammer (T59L-100-B), remove dust seal from rear of valve housing. Discard seal. Remove snap ring from valve housing. See Figure .
  2. Turn valve housing over. Insert Driver Handle (T65P-3524-A2) and Bearing/Seal Remover (T65-3524-A3) in valve housing opposite oil seal. Tap bearing and seal out of housing. Discard seal. If damaged, remove inlet and outlet tube seats using Tube Seat Remover (T74P-3504-L).
scientia non olet · About LEMON Manuals