LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> B2300 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect vacuum hose from regulator. Disconnect fuel line coupling at regulator. Refer to FUEL LINE CONNECTORS  .
  2. Remove regulator mounting screws. Remove regulator, "O" ring and washer. To install, reverse removal procedure using NEW washer and "O" ring. Lubricate "O" ring with light oil. DO NOT  use silicone grease.
scientia non olet · About LEMON Manuals