Blower Motor Resistor
WARNING: This page is about a different car, the 1997 Mazda MX-6 and 1997 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
Remove glove box. Disconnect resistor connector. Using ohmmeter, check continuity between indicated resistor terminals. See BLOWER MOTOR RESISTOR TEST table. Replace resistor if continuity is not as specified.
BLOWER MOTOR RESISTOR TEST
| Terminal Wire Color | Continuity |
|---|---|
| Blue/White & Green/Red | Yes |
| Blue/White & Blue | Yes |
| Blue/White & Blue/Yellow | Yes |