Solenoid Valves
WARNING: This page is about a different car, the 1995 Mazda MX-3. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect hydraulic unit 6-pin connector. Hydraulic unit is located in left front of engine compartment, near battery. Using ohmmeter, measure resistance between specified terminals of hydraulic unit connector. See Fig 1 . See HYDRAULIC UNIT CONNECTOR TERMINAL RESISTANCE . If resistance is not as specified, check wiring harness. If wiring harness is okay, replace hydraulic unit.
HYDRAULIC UNIT CONNECTOR TERMINAL RESISTANCE
| Terminals | Ohms |
|---|---|
| A & F | 3 |
| B & F | 3 |
| C & E | 3 |
| D & E | 3 |