LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1996 >> MX-6 Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Clearing Codes

Clearing Codes

NOTE: Disconnecting battery does not clear Diagnostic Trouble Codes (DTCs). If DTCs will not clear, ensure stoplight switch is functioning properly.
  1. Turn ignition off. Connect a jumper wire between TBS terminal and GND terminal of Data Link Connector (DLC). See Figure . Turn ignition on. Output all Diagnostic Trouble Codes (DTCs) stored in ABS control module memory. When first code is repeated, depress brake pedal 10 times at intervals of less than one second.
  2. When DTCs are cleared, ABS warning light will illuminate for 3 seconds, then go out. ABS operation should return to normal control. If ABS warning light does not operate as described and ABS does not return to normal operation, repeat procedure ensuring brake pedal interval does not exceed one second.
scientia non olet · About LEMON Manuals