LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1996 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Engine Controls - Adjustments) >> Throttle Position (TP) Sensor >> Throttle Position (TP) Sensor Continuity >> Inspection

Throttle Position (TP) Sensor Continuity: Inspection

WARNING: This page is about a different car, the 1997 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Ensure throttle valve is in closed position. Disconnect TP sensor connector. Using an ohmmeter, check for continuity between terminals "A" and "B" at TP sensor. See Figure . Continuity should exist. If continuity exists, go to next step. If continuity does not exist, adjust TP sensor.
  2. Insert a .016" (.4 mm) feeler gauge between throttle lever and throttle stop screw. Check for continuity between terminals "A" and "B" of TP sensor connector. See Figure . Continuity should not exist. If continuity exists, adjust TP sensor.
scientia non olet · About LEMON Manuals