LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1996 >> B3000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Camshaft Position (CMP) Sensor - 2.3L >> Removal & Installation

Removal & Installation

  1. CMP sensor is mounted on left front of engine behind A/C bracket. Disconnect negative battery cable. Remove accessory drive belt.
  2. Remove A/C compressor mounting bolts and set compressor aside. Remove power steering pump and bracket and set aside. Disconnect CMP sensor connector. Remove CMP sensor mounting bolts. Remove CMP sensor from oil pump housing. To install, reverse removal procedure. Recharge A/C system.
scientia non olet · About LEMON Manuals