LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1996 >> B3000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel System Pressure Release >> B2300 & B3000

B2300 & B3000

  1. Disconnect negative battery cable. If necessary, remove snow/ice shield. Remove air intake tube between air cleaner and throttle body. Remove fuel filler cap to release fuel tank pressure. Connect Fuel Pressure Gauge (49-UN01-010) to fuel pressure relief valve (Schrader valve) on fuel rail.
  2. As an alternate method, disconnect inertia switch connector behind right side of instrument panel, under radio. Start engine and operate until it stalls.
scientia non olet · About LEMON Manuals