LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1996 >> B3000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Engine Controls - Remove/Install/Overhaul) >> Ignition System >> CMP Synchronizer - 3.0L >> Removal

CMP Synchronizer - 3.0L: Removal

WARNING: This page is about a different car, the 1995 Mazda B4000, 1995 Mazda B3000, and 1995 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position crankshaft to TDC of cylinder No. 1, on compression stroke. Note position of electrical connector on CMP sensor.
  2. Disconnect negative battery cable. Unplug harness connector from CMP sensor. Remove CMP sensor screws and CMP sensor from positioner. Remove synchronizer hold-down bolt and CMP synchronizer.
CAUTION: Do not rotate crankshaft while synchronizer is removed from engine.
scientia non olet · About LEMON Manuals