LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1995 >> MX-6 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation

Removal & Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative battery cable. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect vacuum and fuel hose(s) from regulator. Remove regulator mounting bolts. Remove regulator, gasket and "O" ring (if equipped).
  2. To install, reverse removal procedure. Install NEW gasket and "O" ring (if equipped).
scientia non olet · About LEMON Manuals