Solenoid Valves
WARNING: This page is about a different car, the 1996 Mazda Millenia and 1995 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect hydraulic unit 8-pin connector. Using ohmmeter, measure resistance between specified terminals of hydraulic unit connector. See Fig 1 . See HYDRAULIC UNIT CONNECTOR TERMINAL RESISTANCE . If resistance is not as specified, check wiring harness. If wiring harness is okay, replace hydraulic unit.
HYDRAULIC UNIT CONNECTOR TERMINAL RESISTANCE
| Terminals | Ohms |
|---|---|
| A & E | 3 |
| B & F | 3 |
| C & G | 3 |
| D & H | 3 |