Main Switch

Disconnect main switch connector. With main switch in specified position, check continuity between main switch connector Pins. See MAIN SWITCH CONTINUITY TEST . SeeFig 1 . If continuity is not as specified, replace main switch. If continuity is as specified, check and repair wiring between fuse and main switch or between main switch and ground as necessary.

MAIN SWITCH CONTINUITY TEST

Switch Position

Continuity Between Pins

OFF

⁽¹⁾ "I" & "K"

Neutral

"H" & "L"; ⁽¹⁾ "I" & "K"

"F", "H" & "L"; ⁽¹⁾ "B" & "L"; ⁽¹⁾ "I" & "K"

⁽¹⁾	Apply battery voltage across these Pins to test switch backlighting or indicator light.

Fig 1: Identifying Main Switch Connector Pins

Courtesy of MAZDA MOTORS CORP.