LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1995 >> B3000 Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Gearshift Lever

Gearshift Lever

  1. With engine off and parking brake applied, place shift lever in "OD" position. Hang a 3 lb. (1.3 kg) weight on selector lever. From below vehicle, pull down lock tab on shift cable and remove fitting from manual lever ball stud.
  2. Position manual lever in "OD" position by moving lever completely rearward (counterclockwise), and then moving lever 3 detents forward (clockwise). Connect cable end fitting to manual lever.
  3. Push up on lock tab to lock cable in adjusted position. Remove weight from selector lever. Move lever through all positions, ensuring transmission is at full detent in each position.
scientia non olet · About LEMON Manuals