LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1995 >> 929 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Component Testing >> Starter Cut Relay

Starter Cut Relay

  1. Remove starter cut relay. Check continuity between starter cut relay terminals "C" and "F". SeeFig 1 . If continuity does not exist, go to next step. If continuity exists, replace starter cut relay.
  2. Apply battery voltage to starter cut relay terminal "A" and ground terminal "B". Check continuity between starter cut relay terminals "C" and "F". If continuity exists, starter cut relay is okay. If continuity does not exist, replace starter cut relay.
Fig 1: Identifying Starter Cut Relay Terminals
G93F82524Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals