LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> RX-7 Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Troubleshooting >> Symptom No. 2

Symptom No. 2

  1. Turn ignition on. Measure voltage at the following wire terminals of main switch connector with main switches in specified position. If battery voltage is present at all terminals, go to next step. If battery voltage is not present at all terminals, check main switch. See MAIN SWITCH TEST under COMPONENT TESTING.
    • Red wire (driver's switch in UP position)
    • Green wire (driver's switch in DOWN position)
    • Black/White wire (main switch/passenger's in UP position)
    • Black/Yellow wire (main switch/passenger's in DOWN position).
  2. Measure voltage at Red wire terminal of driver's window motor connector with driver's switch in UP position. Also measure voltage at Green wire terminal of driver's window motor connector with driver's switch in DOWN position. If battery voltage is present at both terminals, check window motor. See WINDOW MOTOR TEST under COMPONENT TESTING. If battery voltage is not present at both terminals, repair wiring between main switch and window motor.
scientia non olet · About LEMON Manuals