Retractor Relay

Remove retractor relay. Check continuity between specified terminals of retractor relay 6-pin connector. See RETRACTOR RELAY TEST table. SeeFig 1 . If continuity is not as specified, replace retractor relay.

RETRACTOR RELAY TEST

Condition

Continuity Between Terminals

Relay Not Energized

"A" & "B" "C" & "E"

Relay Energized ⁽¹⁾

"C" & "F"

⁽¹⁾	Apply battery voltage across terminals "A" and "B".

Fig 1: Identifying Retractor Relay Terminals/Internal Circuit

Courtesy of MAZDA MOTORS CORP.