LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> RX-7 Automatic >> Repair and Diagnosis >> Body & Frame >> Headlight Doors - Automatic >> Component Testing >> Retractor Motor

Retractor Motor

  1. A link connects retractor motor to headlight assembly. Disconnect link from headlight assembly. Disconnect retractor motor 4-pin connector. Apply battery voltage across terminals "B" (positive) and "A" (negative) of retractor motor connector. SeeFig 1 . Leave battery voltage connected across terminals as specified.
  2. To raise headlight, apply battery voltage across terminals "C" (positive) and "A" (negative) of retractor motor connector. To lower headlight, apply battery voltage across terminals "D" (positive) and "A" (negative) of retractor motor connector. If retractor motor does not operate as specified, replace retractor motor.
Fig 1: Identifying Retractor Motor Connector Terminals
G93F82771Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals