Fuel Gauge Sending Unit

WARNING: On vehicles with fuel-injected engine, relieve fuel pressure before servicing fuel system.

Remove fuel gauge sending unit. Connect ohmmeter between the following wire terminals of fuel gauge sending unit connector:
- Yellow/White and Black/Yellow
Measure resistance with fuel gauge sending unit float at specified position. See FUEL GAUGE SENDING UNIT RESISTANCE . If resistance is not as specified, replace fuel gauge sending unit.

FUEL GAUGE SENDING UNIT RESISTANCE ⁽¹⁾

Float Position

Ohms

Fully Raised

154-162

Fully Lowered

14-18

⁽¹⁾	Resistance values and float positions are approx.