LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> Navajo DX, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> EGR (CALIFORNIA) >> EGR Control Valve

EGR Control Valve

Bring engine to normal operating temperature and operate at idle. Disconnect and plug vacuum hose at EGR control valve. See Fig 1 . Engine should run smoothly. Connect vacuum pump to EGR control valve, and apply 5-10 in. Hg. Engine should run rough. If engine does not run rough, clean or replace EGR control valve.

Fig 1: EGR System Component ID (B4000 & Navajo)
G93A80754Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals