LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> Navajo DX, 4WD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rails & Injectors >> Installation

Fuel Rails & Injectors: Installation

  1. Lubricate NEW injector "O" rings with light oil. DO NOT  use silicone grease. Carefully install injectors into fuel supply manifold. Carefully install fuel supply manifold into lower manifold using NEW manifold gasket.
  2. Clean and oil fuel supply manifold bolt threads. Install fuel supply manifold bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS  . To complete installation, reverse removal procedure.
Fig 1: Exploded View Of Fuel Supply Manifold Assembly (B4000 & Navajo)
G90E04613Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals