LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-6 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - Adjustments) >> Ignition Timing >> Notes

Ignition Timing: Notes

WARNING: This page is about a different car, the 1994 Mazda Navajo and 1994 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before adjusting ignition timing, warm engine to normal operating temperature. Turn off all accessories. Place transmission in Neutral (M/T) or Park (A/T). Ensure idle speed is correct. See IDLE SPEED under IDLE SPEED & MIXTURE . If timing is not within specification, loosen distributor or Crank Angle Sensor (CAS) lock bolt. Rotate distributor or CAS until timing marks are aligned. Tighten lock bolt.
Fig 1: Locating Ignition Timing Marks (Typical)
G93137Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals