LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-6 LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Basic Testing) >> Ignition Checks - B3000 >> Ignition Coil Resistance

Ignition Coil Resistance

WARNING: This page is about a different car, the 1994 Mazda B3000 and 1994 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove primary and secondary leads from ignition coil. Using ohmmeter, check primary resistance between positive and negative terminals of coil. See Fig 1 and Fig 2 . Resistance should be as specified in IGNITION COIL RESISTANCE  table. If resistance is not as specified, replace ignition coil.
  2. Check secondary resistance between (positive) terminal and coil tower. See Fig 1 and Fig 2 . See IGNITION COIL RESISTANCE  table. If resistance is not within specification, replace coil.
Fig 1: Checking Coil (4-Cyl.)
G94E45116Courtesy of MAZDA MOTOR CORP.
Fig 2: Checking Coil (V6)
G94F45117Courtesy of MAZDA MOTOR CORP.
IGNITION COIL RESISTANCE

Application Primary Secondary
B3000 (1) (1)
(1) Information is not available.
scientia non olet · About LEMON Manuals