LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-6 Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Component Testing >> Relay Box (Fail-Safe Relay Harness Test)

Relay Box (Fail-Safe Relay Harness Test)

  1. Turn ignition switch to OFF position. Disconnect ABS 18-pin control unit connector. Turn ignition switch to ON position. Connect terminal 2J (Black/Blue wire) of 18-pin ABS control unit connector to ground.
  2. If fail-safe relay in relay box does not click or ABS warning light illuminates when terminal 2J is grounded, check fail-safe relay. See RELAY BOX (FAIL-SAFE RELAY RESISTANCE TEST) under COMPONENT TESTING. If fail-safe relay is okay, check wiring harness between fail-safe relay and ABS control unit. If wiring harness is okay, go to next step.
  3. With terminal 2J grounded, check for 12 volts at ABS 18-pin connector terminal 1D (Brown wire). If terminal 1D does not indicate 12 volts, check fail-safe relay and wiring harness between fail-safe relay and hydraulic unit.
scientia non olet · About LEMON Manuals