LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-6 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rails & Injectors >> Removal & Installation (2.5L)

Removal & Installation (2.5L)

  1. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect negative battery cable. Remove air intake tube. Disconnect vacuum and fuel hoses from fuel rail. Disconnect injector electrical connectors. Remove fuel rail, injectors and pressure regulator as an assembly. Remove insulators, injectors and "O" rings from fuel rail.
  2. To install, reverse removal procedure. Apply coat of engine oil to NEW "O" rings and install rings on injectors. Install NEW insulators. Tighten fuel rail mounting bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals