LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Throttle Position (TP) Sensor >> Inspection (M/T)

Inspection (M/T)

  1. Disconnect TP sensor connector. Insert feeler gauge of specified thickness between throttle lever and throttle stop screw. See TP SENSOR CONTINUITY (M/T) table.
  2. Connect ohmmeter between specified terminals of TP sensor connector. See Figure. If continuity is not as specified, adjust TP sensor. See ADJUSTMENT procedure.
scientia non olet · About LEMON Manuals