LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-3 Base, Standard >> Repair and Diagnosis >> Transmission >> Clutches >> Hydraulic System Bleeding

Hydraulic System Bleeding

  1. Remove bleeder screw cap, located at clutch master cylinder. Install vinyl hose onto bleeder screw. Submerge other end of hose in container of brake fluid.
  2. Fill reservoir with DOT 3 brake fluid. Have assistant press and release clutch pedal several times, then hold pedal down. With pedal pressed, loosen bleeder screw to let air and fluid escape.
  3. Repeat step 2) until no more air bubbles emerge from hose. Tighten bleeder screw. Fill reservoir. Operate clutch while inspecting for leaks. Check clutch and brake operation.
scientia non olet · About LEMON Manuals