LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls - Basic Testing) >> Fuel System >> Fuel Pressure (Fuel Injection) >> Fuel Pump Relay

Fuel Pump Relay

WARNING: This page is about a different car, the 1994 Mazda Navajo and 1994 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel pump relay (located under power distribution box on right inner fender). Connect 12 volts to terminal "C" and ground terminal "D". Check for continuity between terminals "A" and "B". If continuity is present, relay is okay. If continuity is not present, replace relay.
  2. Turn ignition on. Ensure 12 volts are present on Red and Black/Yellow or Yellow wires. If 12 volts are not present, repair circuits from Electronic Engine Control (EEC) power relay, battery or power distribution box.
  3. Connect 12 volts to terminal "A". Fuel pump should operate. If pump does not operate, repair wiring to inertia switch, fuel pump or fuel pump ground, or replace fuel pump.
scientia non olet · About LEMON Manuals