LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MPV LX >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect vacuum and fuel hose(s) from regulator. Remove regulator mounting bolts. Remove regulator, gasket and "O" ring (if equipped).
  2. To install, reverse removal procedure. Install NEW gasket and "O" ring (if equipped). Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals