LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MPV Base, 3D Van Cargo >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body >> Removal & Installation

Removal & Installation

  1. On 3.0L, drain about 2 qts. (1.9 L) of coolant from cooling system. On all models, disconnect negative battery cable. Remove air intake tubes.
  2. Disconnect accelerator cable, coolant hoses and electrical connectors from throttle body as necessary. Remove throttle body. To install, reverse removal procedure using NEW throttle body gasket. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals